IEC60754 Wire And Cable Halogen Acid Gas Release Tester

IEC60754 Wire And Cable Halogen Acid Gas Release Tester Product Introduction:

The halogen acid gas release measuring device is designed and manufactured according to the test methods GB/T 17650 IEC 60754-1 and IEC 60754-2. It is used to test the halogen gas content, pH value (hydrogen ion content), conductivity, etc. released by wires and cables during combustion.

IEC60754 Wire And Cable Halogen Acid Gas Release Tester Standards:

• GB/T 17650.1～2
• IEC 60754- 1～2

IEC60754 Wire And Cable Halogen Acid Gas Release Tester Technical Specification:

IEC60754 Wire And Cable Halogen Acid Gas Release Tester Parameter:

• Activated carbon (air filtration): filter the gas source through the filter;
• Silica gel (air drying): device for drying the gas source;
• Flow meter: adjustable from 0.1 to 1L/min, device for controlling the gas source flow;
• Thermocouple: K-type high temperature resistant stainless thermocouple 0 to 1300℃;
• Quartz tube: φ40×800;
• Magnetic stirrer: stirrer for mixing combustion gas in distilled water;
• pH meter: device for measuring pH acidity (Lei Ci);
• Conductivity meter: instrument for measuring the conductivity of combustion gas (Lei Ci);
• 7〃 color touch screen and PLC and PID automatic calculation module control the temperature of the heating furnace;
• Mode conversion can meet two test methods;
• Heating furnace: φ220×600, heating effective space φ43×550, power 4KW;
• Washing bottle: 2 500ml straight tube washing bottles, 1 2L measuring cup.
 

IEC60754 Wire And Cable Halogen Acid Gas Release Tester Installation requirements:

• Installation size: 2300mm(W)×600mm(D)
• Power supply: AC 220V, 50/60Hz, 21A
• Reagents, glassware, gas source (provided by the customer)