제품 세부 정보

집 상품

IEC 60331 Cable Fire Resistance Tester with PC Control Adjustable Voltage and Impact Water Spray Test

브랜드 이름:	GOLD
모델 번호:	GD-IEC 60331
MOQ:	1 세트
가격:	USD 5000-10000/set
배달 시간:	30 일
지불 조건:	L/C, D/A, D/P, T/T, Western Union

상세 정보

제품 설명

상세 정보

원래 장소:

중국

인증:

ISO

제품 이름:

와이어 및 케이블 내화성 시험기

기준:

IEC 60331,BS 6387,BS 8491

실험적인 공기 압력:

86~106Kpa

샘플 적용 전압:

AC100V ～ 1000V 조정 가능

제어 방법:

PC 제어

가스 공급원:

프로판, 건조 압축 공기

전압:

380V

배기가스:

최소 15m³/분

포장 세부 사항:

합판 케이스

공급 능력:

달 당 5 세트

강조하다:

PC Control Cable Fire Resistance Tester

Adjustable Voltage Circuit Integrity Tester

Impact Water Spray Test Wire and Cables Fire Resistance Tester

제품 설명

IEC 60331 Cable Fire Resistance Tester BS 6387 BS 8491 Impact And Water Spray Test

Cable Fire Resistance Tester Product Introduction:
The fire tester's performance requirements, including fire resistance, water spray fire resistance, and mechanical fire resistance tests, are applicable to mineral insulated cables with rated voltages up to 450/750V, ensuring they maintain circuit integrity for extended periods under fire. This complies with the British fire-resistant cable standard, BS6387, IEC 60331-1,-2,-11,-21,-23,-25, BS 8491 "Specification for performance requirements for cables intended to maintain circuit integrity under fire conditions."

Cable Fire Resistance Tester Standards:

BS6387
IEC60331--(1,2,11,21,23,25)
BS 8491
GB/T19216.(11,21,23,25)
GB/T19216.(12,31)
GB/T19666
EN50200

Cable Fire Resistance Tester Specifications:

Parameter	Value
Test cabinet size	1500mm(W)×850mm(D)×1600mm(H)
Console size	1500mm(w)×900mm(D)×1300mm(H)
Water tank size	1500mm×1200mm×900mm
Test chamber	(prepared by the customer)
Gas source	propane, air (prepared by the customer)
Power supply	three-phase five-wire AC380V 50/60Hz 30A

Wire and Cables Circuit Integrity Tester Technical Parameters:

The combustion rack is cabinet-style, with fire-resistant and impact-resistant brackets adjacent to each other, providing convenient operation and an aesthetically pleasing appearance.
Burner: 500mm ribbon-type blowtorch (with venturi mixer). Burner holes are arranged in three staggered rows, with a hole diameter of φ1.32mm and a center distance of φ3.2mm.
Fire-resistant bracket: Consists of two metal rings, approximately 300mm apart. The inner diameter of the metal ring supporting the test is approximately 150mm.
Fire-Resistant Impact Test Stand:
- For IEC60331-1 specimens with an outer diameter exceeding 20 mm, the impact test ladder consists of a steel frame with two central vertical steel members that can be adjusted left and right.
- For IEC60331-2 specimens with an outer diameter not exceeding 20 mm, the test wall consists of a heat-resistant, non-combustible non-metallic material securely fastened to two horizontal steel support rods.
Sample applied voltage: AC 100V-1000V, adjustable
Sample short-circuit breakdown current: 2A
Sample holding current: 100-260mA, adjustable
Three-phase transformer: 380V, 9kVA
Specimen short-circuit or open-circuit will stop the flame supply and cut off the voltage, and the software will display a fault message
Flame supply time: Adjustable from 0 to 999 minutes
Two φ1.5mm thermocouples and a corresponding thermometer for flame correction display flame temperature
Gas source control and regulation: Air flow rate is adjustable from 20 to 200 L/min using a mass flow meter; propane flow rate is adjustable from 2 to 20 L/min using a mass flow meter
Control method: Computer software controls the operation, monitoring current, voltage, gas flow rate, test results, and graph printing during the test

태그:

연기 밀도 시험기

내염성 테스터

화염 확산 테스트

열 방출률 측정기

흡연 독성 검사

인화성 시험 장비

배터리 화재 테스트

콘 열량계

NBS 연기 밀도 챔버

제한된 산소 지수 테스터

케이블 방화 저항 검사기

불화성 없는 시험

환경 실험 장비