products details

Home Products

IEC 60331 Cable Fire Resistance Tester with PC Control Adjustable Voltage and Impact Water Spray Test

IEC 60331 Cable Fire Resistance Tester with PC Control Adjustable Voltage and Impact Water Spray Test

Brand Name:	GOLD
Model Number:	GD-IEC 60331
MOQ:	1 set
Price:	USD 5000-10000/set
Delivery Time:	30 days
Payment Terms:	L/C,D/A,D/P,T/T,Western Union

Detail Information

Product Description

Detail Information

Place of Origin:

China

Certification:

ISO

Product Name:

Wire And Cables Fire Resistance Tester

Standard:

IEC 60331,BS 6387,BS 8491

Experimental Air Pressure:

86～106kpa

Sample Applied Voltage:

AC100V～1000V Adjustable

Control Method:

PC Control

Gas Source:

Propane, Dry Compressed Air

Voltage:

380V

Exhaust:

Minimum 15m³/min

Packaging Details:

Plywood case

Supply Ability:

5 sets per months

Highlight:

PC Control Cable Fire Resistance Tester

Adjustable Voltage Circuit Integrity Tester

Impact Water Spray Test Wire and Cables Fire Resistance Tester

Product Description

IEC 60331 Cable Fire Resistance Tester BS 6387 BS 8491 Impact And Water Spray Test

Cable Fire Resistance Tester Product Introduction:
The fire tester's performance requirements, including fire resistance, water spray fire resistance, and mechanical fire resistance tests, are applicable to mineral insulated cables with rated voltages up to 450/750V, ensuring they maintain circuit integrity for extended periods under fire. This complies with the British fire-resistant cable standard, BS6387, IEC 60331-1,-2,-11,-21,-23,-25, BS 8491 "Specification for performance requirements for cables intended to maintain circuit integrity under fire conditions."

Cable Fire Resistance Tester Standards:

BS6387
IEC60331--(1,2,11,21,23,25)
BS 8491
GB/T19216.(11,21,23,25)
GB/T19216.(12,31)
GB/T19666
EN50200

Cable Fire Resistance Tester Specifications:

Parameter	Value
Test cabinet size	1500mm(W)×850mm(D)×1600mm(H)
Console size	1500mm(w)×900mm(D)×1300mm(H)
Water tank size	1500mm×1200mm×900mm
Test chamber	(prepared by the customer)
Gas source	propane, air (prepared by the customer)
Power supply	three-phase five-wire AC380V 50/60Hz 30A

Wire and Cables Circuit Integrity Tester Technical Parameters:

The combustion rack is cabinet-style, with fire-resistant and impact-resistant brackets adjacent to each other, providing convenient operation and an aesthetically pleasing appearance.
Burner: 500mm ribbon-type blowtorch (with venturi mixer). Burner holes are arranged in three staggered rows, with a hole diameter of φ1.32mm and a center distance of φ3.2mm.
Fire-resistant bracket: Consists of two metal rings, approximately 300mm apart. The inner diameter of the metal ring supporting the test is approximately 150mm.
Fire-Resistant Impact Test Stand:
- For IEC60331-1 specimens with an outer diameter exceeding 20 mm, the impact test ladder consists of a steel frame with two central vertical steel members that can be adjusted left and right.
- For IEC60331-2 specimens with an outer diameter not exceeding 20 mm, the test wall consists of a heat-resistant, non-combustible non-metallic material securely fastened to two horizontal steel support rods.
Sample applied voltage: AC 100V-1000V, adjustable
Sample short-circuit breakdown current: 2A
Sample holding current: 100-260mA, adjustable
Three-phase transformer: 380V, 9kVA
Specimen short-circuit or open-circuit will stop the flame supply and cut off the voltage, and the software will display a fault message
Flame supply time: Adjustable from 0 to 999 minutes
Two φ1.5mm thermocouples and a corresponding thermometer for flame correction display flame temperature
Gas source control and regulation: Air flow rate is adjustable from 20 to 200 L/min using a mass flow meter; propane flow rate is adjustable from 2 to 20 L/min using a mass flow meter
Control method: Computer software controls the operation, monitoring current, voltage, gas flow rate, test results, and graph printing during the test

Tags:

Smoke Density Tester

Fire Resistance Tester

Flame Spread Test

Heat Release Rate Tester

Smoke Toxicity Test

Flammability Test Equipment

Battery Fire Test

Cone Calorimeter

NBS Smoke Density Chamber

Limited Oxygen Index Tester

Cable Fire Resistance Tester

Non Combustibility Test

Environmental Testing Equipment

Smoke Density Tester

Fire Resistance Tester

Flame Spread Test

Heat Release Rate Tester

Smoke Toxicity Test

Flammability Test Equipment

Battery Fire Test

Cone Calorimeter

NBS Smoke Density Chamber

Limited Oxygen Index Tester

Cable Fire Resistance Tester

Non Combustibility Test

Environmental Testing Equipment

products details

IEC 60331 Cable Fire Resistance Tester with PC Control Adjustable Voltage and Impact Water Spray Test

PC Control Cable Fire Resistance Tester

Adjustable Voltage Circuit Integrity Tester

Impact Water Spray Test Wire and Cables Fire Resistance Tester

flame retardant test for cables

Fire Testing Equipment

circuit integrity test

Cable Vertical Combustion Test machine UL1581 VW-1

Vertical Flame Spread Test Machine Of Vertically Bunched Wires Or Cables IEC 60332-3-10